Sanitary self-priming pump
SLRP series (liquid ring type)
- Product Description
- Product Selection
- Data Download
-
- Commodity name: Sanitary self-priming pump
SLRP series (liquid ring type)
SLRP series pumps are specially designed to handle gas containing fluid materials. These pumps can be widely used in food, chemical, pharmaceutical and similar demanding applications. Especially used as return pump in clean-in-place (CIP) systems.
Model Description 
The main technical parameters Liquid part material
AISI316L stainless steel 304 stainless steel Inner surface polishing
0.4-0.8μm Fluid sealing material
EPDM ethylene propylene rubber/FPM fluororubber/SILI silicone rubber inlet pressure
0.5MPa
temperature range -10°C to +140°C (EPDM) Noise level (at 1m)
Less than 85dB(A)
voltage and frequency 50Hz, 220~240V/380~420V/660~690V, △/Y motor model 50Hz: 4, 5.5, 7.5, 11, 15kW Structural features ● SLRP (ELRP) hygienic self-priming pump is designed according to the hygienic requirements of the aseptic process, and the symbol is 3A hygienic standard. The pump is an end-suction single-stage pump, installed horizontally. The four adjustable legs can be adjusted in height or level according to the site ground without fixing, and the pump inlet and outlet are vertically aligned for easy installation. The stainless steel cover at the motor end effectively protects the safety of the motor, and the motor is an internationally renowned brand. ● SLRP (ELRP) sanitary self-priming pump is designed with an open star impeller and a closed side channel. It has the function of gas-liquid mixed delivery and self-priming. It can transport high-gas content and low-viscosity fluid. It is widely used in CIP return system . ● Shaft seal: single end balanced mechanical seal. -
SLRP (ELRP) series hygienic self-priming pump spectrum
Technical parameter table and performance curve chart The performance curve is converted from the actual measured value of a standard ordinary three-phase motor with four poles and 50 Hz in clean water at 20°C to the rated value. The test data at the rotational speed is plotted. If the density and viscosity of the pumped liquid are greater than that of clean water at normal temperature during model selection, it is necessary to convert the pumping capacity of the actual liquid to configure the motor. The tolerance complies with Appendix C of GB/T3216.
1KW<P< 10KW flow ±10% lift ±8% efficiency -16% input power +17% P> 10KW flow ±9% lift ±7% efficiency -7% input power +9% Technical parameter table and performance curve download: -
NISSIN product brochure: ☜ Click to download
Technical parameter table and performance curve: ☜ Click to download