Sanitary Centrifugal Pump
SCP/ECP series
- Product Description
- Product Selection
- Data Download
-
- Commodity name: Sanitary Centrifugal Pump
SCP/ECP series
SCP/ECP series sanitary centrifugal pumps are mainly used in dairy products, beverages, condiments, beer, liquor, wine, drinking purified water, mineral water and other materials with certain hygienic requirements, as well as pharmaceuticals, biological engineering, fine chemicals, daily Transportation of fluid media in chemical industry and other fields. It can also transport certain suspended solids or corrosive solutions.
Model Description 
The main technical parameters Liquid part material AISI316L stainless steel 304 stainless steel axis Duplex stainless steel Inner surface polishing 0.4-0.8μm Fluid sealing material EPDM ethylene propylene rubber/FPM fluoro rubber/SILI silicone rubber inlet pressure 0.3MPa temperature range -10°C to +140°C (EPDM) Noise level (at 1 meter) Less than 85dB(A) single seal Satisfied with self-flushing Double seal (optional) Water pressure: up to 0.6MPa Water volume: 0.25-0.5L/min voltage and frequency 50Hz, 220~240/380~420V/660~690V, △/Y Motor Specifications 50Hz: 1.5, 2.2, 3, 4, 5.5, 7.5, 11, 15, 18.5, 22, 30, 37kW Structural features ● The form of NISSIN sanitary centrifugal pump is single stage, single suction, open impeller. The pump casing and impeller are carefully designed, and the resistance The loss is small, and the hygienic dead ends are completely eliminated. ● Because of its special structure, it is easy to clean and has excellent hygienic performance. It can satisfy products with hygienic performance The required conveying conditions. ● Consists of standard motor, impeller, pump casing, stainless steel motor protection cover, adjustable stainless steel feet and self-knowledge Intellectual property hygienic mechanical seal composition. ● Mechanical seal material can be selected from silicon carbide /silicon carbide, hard alloy/tungsten carbide according to different conveying media . -
Spectrum of SCPH series new self-priming pump
Technical parameter table and performance curve chart The performance curve is converted from the actual measured value of a standard common three-phase motor with two poles and 50 Hz in clean water at 20°C to the rated value The test data at the rotational speed is plotted. If the density and viscosity of the pumped liquid are greater than that of clean water at room temperature during model selection, it needs to be converted into the ability to pump the actual liquid to configure the motor and impeller diameter. The tolerance complies with Appendix C of GB/T3216.
1KW<P<10KW flow ±10% lift ±8% efficiency -16% input power +17% The tolerance complies with Appendix C of GB/T3216.
P> 10KW flow ±9% lift ±7% efficiency -7% input power +9% and impeller diameter.
Technical parameter table and performance curve download: -
NISSIN product brochure: ☜ lick to download
Technical parameter table and performance curve: ☜ lick to download