Sanitary self-priming pump
SCPH series (induction wheel type)
- Product Description
- Product Selection
- Data Download
-
- Commodity name: Sanitary self-priming pump
SCPH series (induction wheel type)
SCPH's new self-priming pump complies with domestic and foreign safety and health standards for pharmaceuticals, dairy products, food, and light industrial machinery. It can be widely used in the transportation of various high-gas content fluids, especially as a return pump in CIP systems in various fields such as dairy products, beverages, alcohol, food, biopharmaceuticals, and fine chemicals.
Model Description 
The main technical parameters Liquid part material
AISI316L stainless steel
Inner surface polishing
0.4-0.8μm
Fluid sealing material
EPDM ethylene propylene rubber/FPM fluororubber/SILI silicone rubber
Maximum flow
70m3/h
Maximum lift
35m
operating temperature
150°C
inlet pressure
0.5MPa
Noise level (at 1m)
Less than 85dB(A)
Structural features ● SCPH series new self-priming pump is a new type of self-priming pump designed and manufactured in strict accordance with domestic and foreign sanitary standards and using new technology principles. The main hydraulic parts of the pump are composed of a spiral guide wheel, a centrifugal impeller, a composite pump chamber, a pump cover and a return pipe. The motor adopts a well-known imported brand motor. The whole machine is small in size, light in weight, easy to move and stable in performance.
● Compared with the traditional CIP return pump, it has outstanding advantages such as high efficiency, low noise and good adaptability (the diameter of the centrifugal impeller of the same pump can be cut to meet the needs of different working conditions).
-
Spectrum of SCPH series new self-priming pump
Technical parameter table and performance curve chart The performance curve is converted from the actual measured value of a standard common three-phase motor with two poles and 50 Hz in clean water at 20°C to the rated value The test data at the rotational speed is plotted. If the density and viscosity of the pumped liquid are greater than that of clean water at room temperature during model selection, it needs to be converted into the ability to pump the actual liquid to configure the motor and impeller diameter. The tolerance complies with Appendix C of GB/T3216.
1KW<P< 10KW flow ±10% lift ±8% efficiency -16% input power +17% P> 10KW flow ±9% lift ±7% efficiency -7% input power +9% Technical parameter table and performance curve download: -
NISSIN product brochure: ☜ Click to download
Technical parameter table and performance curve: ☜ Click to download